top of page

Papers in Conference Proceedings (Referred*)

​

  1. *A Multi-Objective Hybrid Optimization Methodology for Minimizing Sonic Boom of Aircraft at Fixed Lift (with Blanchard, A.-K., Schoppe, J., Reddy, S.R., Cizmas, P.G.A.), AIAA SciTech2022, San Diego, CA, January 4-8, 2022.

  2. *Supercritical CO2 Based Microchannel Recuperators Under Vertical High Temperature Gradient Condition (with Chitale, J.), CHT-21 – 8th International Symposium on Advances in Computational Heat Transfer, Rio de Janeiro, Brazil, August 15 – 19, 2021.

  3. Multi-Disciplinary Disciplinary Practical Solutions of Inverse Problems, Plenary Lecture, Inverse and Ill-Posed Problems-XIII International Scientific Conference, Novosibirsk, Russia, April 12-20, 2021.

  4. Computational Design of Alloy Chemistry for Optimized Multiple Macroscopic and Microscopic Properties (with Jha, R.), Best Poster Award, NSF-JST Joint Workshop on Thermal Transport, Materials Informatics and Quantum Computing, March 22-25, 2021.

  5. *Design of Ti-Al-Cr-V Alloys for Maximum Thermodynamic Stability (with Jha, R.), 2021 TMS Annual Meeting & Exhibition, March 15-18, 2021.

  6. *Inverse Design of Chemistry of High Temperature Ni-Base Superalloys Using CALPHAD and Machine Learning (with Jha, R.), 2021 TMS Annual Meeting & Exhibition, March 15-18, 2021.

  7. *Discovery of Optimized ω-Phase Free Ti-Based Alloys Using CALPHAD and Artificial Intelligence Approach (with Jha, R.), 2021 TMS Annual Meeting & Exhibition, March 15-18, 2021.

  8. *Conjugate Heat Transfer Analysis of a Supercritical CO2 Based Counter-Flow Micro Channels 3D Heat Exchanger (with Chitale, J., Abdoli, A., Sabau, A.S., Black, J.B.), IThrerm-19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, pp. 23-29, Orlando, FL, July 2020.

  9. *A Hybrid Algorithm for Many-Objective Optimization (with Reddy, S.R), Inverse Problems, Design and Optimization Symposium – IPDO2019, Tianjin, China, Sept. 24-26, 2019.

  10. *Achieving Quieter Supersonic Flight Through Outer-Mold Line Modifications: An Optimization Study (with Reddy, S.R., Carpenter, F.L., Cizmas, P.G.), AIAA Aviation 2019, Dallas, TX, June 17-21, 2019.

  11. *Controlling Sonic Boom Loudness Through Outer Mold Line Modification: A Sensitivity Study (with Carpeter, F.L., Cizmas, P.G., Reddy, S.R., Magee, T., Lazzara, D.S.), AIAA paper 3019495, AIAA Science and Technology Forum and Exposition 2019, San Diego, CA , January 7-11, 2019.

  12. *Magnetic Resonance Thermometry During the Localized Heating of Biological Tissues, (with Pacheco, C.C., Orlande, H.R.B., Colaco, J.M.), paper IHTC16-22069, The 16th International Heat Transfer Conference, Beijing, China, August 10-15, 2018.

  13. *Simultaneous Model Selection and Parameter Estimation in Heat Conduction (with Loiola, B.R., Orlande, H.R.B.), Joint ICVRAM-ISUMA Uncertainties Conference, paper ICWRAMISUMA2018-0132, Florianopolis, SC, Brazil, April 8-11, 2018.

  14. *Experimental Estimation of a Heat Flux Imposed by a Laser Diode With the Steady State Kalman Filter (with da Fonseca, H.M., Pacheco, C.C., Orlande, H.R.B., Fudym, O.), American Society of Thermal and Fluids Engineers ASTFE, paper TFEC-2018-20899, Fort Lauderdale, FL, March 4-7, 2018

  15. *Bladelets – Winglets on Blades of Wind Turbines: A Design Optimization Study (with Reddy, S.R., Sobieczky, H.) , paper ASME IMECE-70220, Tampa, FL, Nov. 3-9, 2017.

  16. *Materials Processing Control Using Electric and Magnetic Fields, (with Colaco, M.J., Dennis, B.H., Reddy, S.R.), Plenary Lecture, ASME IMECE2017-71221, Tampa, FL, Nov. 3-9, 2017.

  17. *High Frequency and High Power Electro-Magneto-Hydro-Dynamics and Heat Transfer (with Abdoli, A., Zeidi, S.M.J., Reddy, S.R.), Invited Lecture, ASME IMECE2017-70221, Tampa, FL, Nov. 3-9, 2017.

  18. *An Effective Parameter Screening Strategy for High Dimensional Models (with Chitale, J., Khare, Y., Munoz-Carpena, R., Martinez, C.), paper ASME IMECE2017-71458, Tampa, FL, Nov. 3-9, 2017.

  19. *Parameter Identification in Differential Equations: A Hybrid Minimization Based Method, (with Reddy, S.R., Colaco, M.J. and Orlande, H.R.B.), Invited Lecture, New Trends in Parameter Identification for Mathematical Models: Applications to PDEs and Integral Equations, Rio de Janeiro, Brazil, Oct. 30 – Nov. 3, 2017.

  20. *Reduced Order Model for Fluid Flow and Transport of Passive Scalars in Fluidized Beds (with Reddy, S.R., Chitale, J., Cizmas,, P.G.A., Gokaltun,, S., McDaniel, D.), Coupled Problems 2017, Rhodos Island, Greece, June 12-14, 2017.

  21. *Analysis of Anisotropic Graphene Platelet Heat Spreaders to Reduce Hot Spot Temperature and Temperature Non-Uniformity (with Reddy, S.R.), IEEE iTherm 2017, Orlando, Florida, USA, May 30-June 2, 2017.

  22. *Inverse Determination of Spatially Varying Thermal Capacity and Thermal Conductivity in Arbitrary 2D Objects (with Reddy, S.R, Zeidi, S.M.J.), International Symposium on Advances in Computational Heat Transfer, paper CHT-17-106, Naples, Italy, May 28-June 1, 2017.

  23. *Effects of Needle Lift and Fuel Type on Cavitation Formation and Heat Transfer Inside Diesel Fuel Injector Nozzle (with Zeidi, S.M.J., Reddy, S.R., Darvish, S.), International Symposium on Advances in Computational Heat Transfer, paper CHT-17-102, Naples, Italy, May 28-June 1, 2017.

  24. *Conjugate Cooling Protocols for Human Hearts Including Epicardial Blood Vessels (with Abdoli, A., Zeidi, S.M.J.), CMBE2017, Pittsburgh, PA, April 10-12, 2017.

  25. *State Estimation Problems in PRF-Shift Magnetic Resonance Thermometry (with Pacheco, C.C., Orlande, H.R.B., Colaco, M.J.), Fourth International Conference on Computational Methods for Thermal Problems – ThermaComp2016 (eds.: Massarotti, N., Nithiarasu, P., Joshi, Y.), Georgia Tech, Atlanta, GA, July 6-8, 2016.

  26. Microscopic Characterization of Cu-Ni-rich Bridges in Alnico Alloys (with Fan, M., Liu, Y., Jha, R., Schwartz, J. and C.C. Koch, C.C.) ,13th Joint MMM-Intermag Conference, San Diego, CA, January 11-15, 2016.

  27. *Design and Optimization of Rare-Earth Free Hard Magnetic Alloys and Nickel-Based Superalloys for High Temperatures Applications (with Jha, R., Colaco, M.J.), COBEM-2015, paper 1284, Rio de Janeiro, Brazil, December 6-11, 2015.

  28. *Identification of Material Properties Through a Markov Chain Monte Carlo Technique and a Response Surface Approach (with Pacheco, C., Vesenjak, M., Borovinsek, M., Jha, R., Reddy, S., Orlande, H., Colaço, M.), COBEM-2015, paper 0584, Rio de Janeiro, Brazil, December 6-11, 2015.

  29. *Conjugate Analysis of Thin Film Heat Spreaders to Reduce Temperature at Hot Spots (with Reddy, S., Abdoli, A., Jha, R.), ASME IMECE, paper 52804, Houston, TX, November 13-19, 2015.

  30. *Multi-objective Optimization of Micro-Pin-Fin Arrays for Cooling of High Heat Flux Electronics (with Reddy, S.), ASME IMECE, paper 54166, Houston, TX, November 13-19, 2015.

  31. *Inverse Determination of Spatial Variation of Diffusion Coefficients in Arbitrary Objects Creating Desired Non-Isotropy of Field Variables (with Reddy, S.R., Colaco, M.J., Orlande, H.R.B.), MS&T15-Materials science and Technology 2015 Conference, Columbus, Ohio, October 4-8, 2015.

  32. *Multi-Objective Design and Optimization of Hard Magnetic Alloys Free of Rare Earths (with R. Jha, M.J. Colaco, I.N. Egorov, C. Poloni, N. Chakraborti, M. Fan, J. Schwartz, C.C. Koch), MS&T15-Materials science and Technology 2015 Conference, Columbus, Ohio, October 4-8, 2015.

  33. *Multi-Objective Optimization of Micro-Pin Fin Arrays for Cooling of High Heat Flux Electronics with a Hot Spot (with Reddy, S.R., Abdoli, A., Pacheco, C.C., Vasquez, G., Jha, R., Colaco, M.J., Orlande, H.R.B.), paper InterPACKICNMM2015-48242, San Francisco, CA, July 6-9, 2015.

  34. *Inverse Design of Cooling of Electronic Chips Subject to Specified Hot Spot Temperature and Coolant Inlet Temperature (with Reddy, S.R.), paper InterPACKICNMM2015-48346, San Francisco, CA, July 6-9, 2015.

  35. Magnetic Alloys Design Using Multi-Objective Optimization (with R. Jha, M.J. Colaco, M. Fan, J. Schwartz, C.C. Koch), ACEX2015-9th International Conference on Advanced Computational Engineering and Experimenting, Munich, Germany, June 29 – July 2, 2015.

  36. Algorithms for multi-objective design optimization of hard magnetic alloys using experimental data (with Jha, R., Chakraborti, N., Fan, M., Schwartz, J., Koch, C., Colaco, M.J.), ICMM4-International Conference on Materials Modeling, May 27-29 (2015), Berkeley, CA.

  37. Inverse Parameter Identification Using Bayesian Statistics and Response Surfaces (with Pacheco, C.C., Vesenjak, M., Borovinšek, M., Jha, R., Reddy, S.R., Orlande, H.R.B., and Colaço, M.J.), ICMM4-International Conference on Materials Modeling, May 27-29 (2015) Berkeley, CA.

  38. *Multi-Winglets: Multiobjective Optimization of Aerodynamic Shapes (with Reddy, S., Sobieczky, H., Abdoli, A.,), paper AIAA-2015-1489, 53rd AIAA Aerospace Sciences Meeting, Kissimmee, FL, January 5-9, 2015.

  39. Estimation of a Position and a Time Dependent High Magnitude Heat Flux Using the Kalman Filter (with Pacheco, C.C., Orlande, H.R.B., Colaco, M.J., da Fonseca, R.M.), 15th Brazilian Congress of Thermal Sciences and Engineering-ENCIT2014, Belem, PA, Brazil, November 10-13, 2014.

  40. Simulation of Cooling Preservation Systems for Human Hearts Destined for Transplantation (with Abdoli, A., Bajaj, C., Stowe, D.F., Jahania, M.S.), BMES2014, San Antonio, TX, October 22-25, 2014.

  41. *The Effect of Surface Functionalization and Temperature on Nanoparticle Penetration into Tumor Spheroids (with Nagesetti, A., Estumano, D., Orlande, H.R.B., Colaco, M.J., McGoron, A.), BMES2014, San Antonio, TX, October 22-25, 2014.

  42. Bayesian Estimate of Mass Fraction of Burned Fuel in Internal Combustion Engines using Pressure Measurements (with Estumano, D.C., Hamilton, F.C., Colaco, M.J., Leiroz, A.J.K., Orlande, H.R.B., Carvalho, R.N.), EngOpt2014, (eds: Rodrigues, H.C., Herskovits, J., Mota Soares, C.M., Guedes, J.M., Araujo, A.L., Folgado, J.O., Moleiro, F., Madeira, J.F.A.), Lisbon, Portugal, Sept. 8-11, 2014, pp. 997-1003.

  43. A combined computational-experimental approach to design of high-intensity permanent magnetic alloys (with Jha, R., Fan, M., Schwartz, J., Koch, C., Egorov, I.N., Poloni, C.,), CONEM2014- National Conference of Mechanical Engineering, August 10-15 (2014), Uberlandia, Brazil).

  44. Identification of Unsteady Location and Intensity a Heat Flux Using Kalman Filter and Improved Lumped Analysis in 3D Heat Conduction (with Pacheco, C.C., Orlande, H.R.B., Colaço, M.J.), 5th International Conference on Computational Methods – ICCM), Cambridge, UK, July 28-30, 2014.

  45. *A Comparison of Particle Filters Applied to the Heat Transfer Coefficient Estimation in Internal Combustion Engines (with Estumano, D.C., Hamilton, F.C., Colaco, M.J., Leiroz, A.J.K., Carvalho, R.N., Orlande, H.R.B.), 11th World Congress of Computational Mechanics – WCCM XI, Barcelona, Spain, July 20-25, 2014.

  46. *Winglets – Multiobjective Optimization of Aerodynamic Shapes (with Reddy, S, Sobieczky, H., Abdoli, A.), 11th World Congress of Computational Mechanics – WCCM XI, Barcelona, Spain, July 20-25, 2014.

  47. *Bayesian Estimation of Parameters in Hodgkin-Huxley’s Model of Biomedical Electric Signals (with Estumano, D. C., Orlande, H.R.B., Colaco, M.J., Ritto, T.G., Riera Diaz, J.J.), Uncertainties2014 – 2nd International Symposium on Uncertainty Quantification and Stochastic Modeling, Rouen, France, July 7-11, 2014.

  48. Multi-Disciplinary Analysis of Cooling Protocols for Human Heart Destined for Transplantation (with Abdoli, A., Bajaj, C., Stowe, D. F., Jahania, M. S.), Invited Lecture, ThermaComp2014 – Third International Conference on Computational Methods for Thermal Problems (eds: N. Massarotti, P. Nithiarasu, B. Sarler), Bled, Slovenia, June 2-4, 2014.

  49. Thermo-Fluid-Stress Analysis of Two-Layer Microchannels for Cooling Chips With Hot Spots (with Abdoli, A., Vasquez, G., Rastkar, S.), ThermaComp2014 – Third International Conference on Computational Methods for Thermal Problems (eds: N. Massarotti, P. Nithiarasu, B. Sarler), Bled, Slovenia, June 2-4, 2014.

  50. *Inverse Determination of Spatially Varying Diffusion Coefficient in Two-Dimensional Objects (with Pasqualette, M.A, Colaco, M.J. and Orlande, H.R.B.), 7th International Conference “Inverse Problems: Modeling & Simulation”, Oludeniz, Fethiye, Turkey, May 26-31, 2014.

  51. *A Combined Experimental-Computational Approach to Design Optimization of High Temperature Alloys (with Jha, R., Pettersson, F., Saxen, H., Chakraborti, N.), paper no. ETS2014-1008, ASME Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries, Seattle, WA, March 25-27, 2014.

  52. Bayesian Particle Filters Applied to Heat Transfer and Biomedical Problems (with Colaco, M.J., Orlande, H.R.B., Silva, W.S., Estumano, D.C., Hamilton, F.C., Leiroz, A.J.K. and Carvalho, R.N.), 5th Asia-Pacific Congress on Computational Mechanics – APCOM2013, Singapore, December 11-14, 2013.

  53. Optimized Multi-Floor Throughflow Micro Heat Exchangers (with Abdoli, A.), paper IMECE2013-63590, ASME IMECE, San Diego, CA, November 15-21, 2013.

  54. *Hybrid Optimization Algorithms and Hybrid Response Surfaces (with Colaco, M.J.), Plenary Lecture, Eurogen2013, Las Palmas de Gran Canaria, Spain, October 7-9, 2013.

  55. *Multi-Objective Design Optimization of Multi-Floor, Branching, Micro Heat Exchangers (with Abdoli, A.), paper HT2013-17738, ASME Summer Heat Transfer Conference, Minneapolis, MN, July 14-19, 2013.

  56. Inverse Determination of Spatially Varying Thermal Conductivity in Two-Dimensional Objects (with Pasqualette, M.A., Colaco, M.J., Orlande, H.R.B., Martin, T.J.), Symposium on Inverse Problems, Design and Optimization-IPDO2013, (eds.: Fudym, O., Battaglia, J.-L.), Albi, France, June 26-28, 2013.

  57. Modern Optimization Algorithms and Particle Swarm Variations (with Inclan, E.J., Yang, X.-S.), Symposium on Inverse Problems, Design and Optimization-IPDO2013, (eds.: Fudym, O., Battaglia, J.-L.), Albi, France, June 26-28, 2013.

  58. *Effective Modifications to Differential Evolution Optimization Algorithm (with Inclan, E.), International Conference on Computational Methods for Coupled Problem in Science and Engineering, (eds.: Idelsohn, S., Papadrakakis, M., Schrefler, B.), Santa Eulalia, Ibiza, Spain, June 17-19, 2013.

  59. *A Hybrid Optimization Algorithm with Search Vector Based Automatic Switching (with Inclan, E.J.), World Congress of Multidisciplinary Optimization, (eds.: Kim, N.-H., Haftka, R.), Orlando, FL, May 15-19, 2013.

  60. Certain Specifics of Nano-Modeling of Various Rheologically Complex Fluids (with Sattarov, R. M., Kurbanbaev, M.I., Sattarzade, I, R., Abitova, A. Zh., Nugiev, M.A. and Muhambetov, B. T.), Khazarneftgazyatag-2012- Scientific Practical Conference, Baku, Azerbaijan, Dec. 4-5, 2012.

  61. Inverse Determination of 3D Shapes in Field Problems, Plenary Lecture, International Conference on Inverse Problems and Related Topics, Southeast University, Nanjing, China, October 21-26, 2012.

  62. Inverse Heat Transfer Problems and their Solutions within the Bayesian Framework (with Orlande, H.R.B.), ECCOMAS Special Interest Conference – Numerical Heat Transfer 2012 (eds: Nowak, A. and Bialecki, R.A.), Gliwice-Wroclaw, Poland, September 4-6, 2012.

  63. Fast Bayesian Inference for an Inverse Heat Transfer Problem Using Approximations (with Neumayer, M., Watzenig, D., Orlande, H. R. B., Colaco, M. J.), Article no. 6229538, pp. 1923-1928, 2012 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2012, Graz, Austria, May 12-16, 2012.

  64. *Application of a Bayesian Filter to Estimate Unknown Heat Fluxes in a Natural Convection Problem (with Colaco, M. J., Orlande, H. R. B. and da Silva, W. B.), Best Paper Award by AMS Technical Committee, ASME paper DETC2011-47652, Symposium at the 2011 ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Vol. 2, Parts A and B, pp, 425-434 (eds. Dennis, B. H., Dulikravich, G. S., Michopoulos, J. and Kumar, A. V.), Washington, DC, August 28-31, 2011.

  65. Estimation of Drying Parameters Including Moisture Diffusivity by Using Temperature Measurements (with Kanevce, G. H., Kanevce, Lj. P., Mitrevski, V. B.), 15thInternational Conference on Computational Methods and Experimental Measurements – CMEM2011, Vol. 51, pp. 111-119, New Forest, UK, May 31-June 6, 2011.

  66. A Fourier Series Method for Solving Ordinary Differential Equations with Non-Constant Coefficients Arising in Inverse Shape Design (with Baker, D. P.), (eds: Kassab, A. J. and Divo, E. A.), International Conference on Inverse Problems in Engineering – ICIPE2011, Orlando, FL, May 4-6, 2011, pp. 275-280.

  67. *Design of Molecules for Pareto Optimum Functionalities (with Bhargava, S.),Keynote Lecture, IPDO2010-Inverse Problems, Design and Optimization Symposium, Joao Pessoa, Brazil, August 25-27, 2010.

  68. *Temperature Field Prediction of a Multilayered Composite Pipeline Based on the Particle Filter Method (with Vianna, F. and Orlande, H.R.B.), paper IHTC14-22462, 14th International Heat Transfer Conference – IHTC, Washington, D.C., August 7-13, 2010

  69. *Optimization of 3D Branching Networks of Micro-channels for Microelectronic Device Cooling (with Martin, T. J.), paper IHTC14-22719, 14th International Heat Transfer Conference – IHTC, Washington, D.C., August 7-13, 2010.

  70. Optimization of Cooling Protocols for Living Organs, Invited Lecture, Panel on Bioheat Transfer (org: Kahlen, F.-J.), 14th International Heat Transfer Conference – IHTC, Washington, D.C., August 7-13, 2010.

  71. Inverse Design of Alloys for Specified Thermo-Mechanical Properties by Using Multi-Objective Optimization, Plenary Lecture, Second International Workshop on Computational Inverse Problems and Applications (ed: Wang, Y.-F.), Beijing, P. R. China, July 12 – July 15, 2010.

  72. Optimal Heating Control to Prevent Solid Deposits in Pipelines (with Vianna, F.L.V. and Orlande, H.R.B.), Fifth European Conference on Computational Fluid Dynamics – ECCOMAS CFD2010, Lisbon, Portugal, June 14-17, 2010.

  73. Design of a Heating System for Petroleum Pipelines Based on State Estimation and Optimal Control (with F. L. V. Vianna, H. R. B. Orlande), IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France.

  74. Multi-Objective Optimization of Topology and Performance of Three-dimensional Networks of Cooling Passages (with Ardila, R.), Keynote Lecture, Energy and Thermal Sciences Symposium at COBEM, 20th International Congress of Mechanical Engineering, Gramado, Brazil, November 15-20, 2009.

  75. Prediction of the Temperature Field in Pipelines Using Bayesian Filters and Non-Intrusive Measurements (with Vianna, F. and Orlande, H. R. B.), COBEM, 20th International Congress of Mechanical Engineering, Gramado, Brazil, November 15-20, 2009.

  76. A Survey of Basic Deterministic, Heuristic and Hybrid Methods for Single Objective Optimization and Response Surface Generation (with Colaco, M. J.),Franco-Brazilian Advanced School, METTI IV – Thermal Measurements and Inverse Techniques, (ed: Orlande, H. R. B. and Fudym, O.), Angra dos Reis, RJ, Brazil, Nov. 8-13, 2009.

  77. *Modified Predator-Prey (MPP) Algorithm for Constrained Multi-objective Optimization (with Chowdhury, S. and Moral, R. J.),(ed: Burczynski, T. and Periaux, J.), EUROGEN 2009, Cracow, Poland, June 15-17, 2009, CIMNE, Barcelona, Spain 2009.

  78. Modified Continuous Ant Colony Algorithm (with Aidov, A.), 2nd International Congress of Serbian Society of Mechanics, Palic (Subotica), Serbia, June 1-5, 2009.

  79. Estimation of the Temperature Field in Pipelines by Using Kalman Filter (with Vianna, F., Orlande, H. R. B.), 2nd International Congress of Serbian Society of Mechanics, Palic (Subotica), Serbia, June 1-5, 2009.

  80. Radial Basis Functions Applied to the Solution of the Natural Convection Problem in Square Cavities (with Magalhaes, A. C., Colaco, M. J and Orlande, H. R. B.), 12th Brazilian Congress of Thermal Engineering and Sciences, Belo Horizonte, MG, Brazil, November 10-14, 2008.

  81. Development of Digital Filters for Inverse Heat Conduction Problems (with de Sousa, P., Fernandes, A. P., Guimaraes, G.), 12th Brazilian Congress of Thermal Engineering and Sciences, Belo Horizonte, MG, Brazil, November 10-14, 2008.

  82. *A Hybrid Self-Organizing Response Surface Methodology (with Moral, R. J.), paper AIAA-2008-5891, 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada, September 10-12, 2008.

  83. *A Hybrid RBF-Based Methods for Highly Multidimensional Response Surfaces Using Scarce Data Sets (with Colaco, M. J.), paper AIAA-2008-5892, 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada, September 10-12, 2008.

  84. Bayesian Estimation of the Thermal Conductivity Components of Orthotropic Solids (with Orlande, H. R. B. and Colaco, M. J.), 5th Brazilian National Congress of Mechanical Engineering – CONEM, Salvador, Bahia, Brazil, August 18-21, 2008.

  85. *Identification of Parameters in a System of Differential Equations Modeling Evolution of Infectious Diseases (with Hernandez, A., Colaco, M. J. and Moral, R. J.), ASME paper DETC2008-49595, Symposium at the 2008 ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), (eds. Dulikravich, G.S., Michopoulos, J. and Kumar, A. V.), Brooklyn, NY, August 3-6, 2008.

  86. *Dynamic Observer Method Based on Modified Green’s Functions for Robust and More Stable Inverse Algorithms (with Sousa, P.F.B., Fernandes. A.P., Borges, V.L. and Guimaraes, G.), ASME paper DETC2008-49062, Symposium at the 2008 ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), (eds. Dulikravich, G.S., Michopoulos, J. and Kumar, A. V.), Brooklyn, NY, August 3-6, 2008.

  87. Predator-Prey Evolutionary Multi-Objective Optimization Algorithm: Performance and Improvements (with Chowdhury, S. and Moral, R. J.), 7th conference of Association for Structural and Multidisciplinary Optimization in the UK (ed: Toropov, V. V.), Bath, U.K., July 7-8, 2008.

  88. A Comparison of Accuracy and Robustness of Methods for Construction of Multi-dimensional Response Surfaces (with Colaco, M. J.), Minisymposium on “Metamodels for High Dimensionality Response Surfaces in Multiobjective Optimization”, 8th World Congress of Computational Mechanics, (eds: Dulikravich, G. S. and Colaco, M. J.), Venice, Italy, June 30-July 5, 2008.

  89. Magneto-Hydrodynamic Simulations Using Radial Basis Functions (with Colaco, M. J.), Minisymposium on “Computational Electro-Magneto-Fluid-Dynamics”, 8th World Congress of Computational Mechanics, (eds: Gerbeth, G., Dulikravich, G. S. and Pericleous, K.), Venice, Italy, June 30-July 5, 2008.

  90. Simulation of Channel Flows Using Thermal Lattice Boltzmann Method (with Gokaltun, S.), ICMES-5th Mesoscopic Methods in Engineering and Science Conference, Amsterdam, The Netherlands, June 16-20, 2008.

  91. Application of Bayesian Filters to Heat Conduction Problems (with Orlande, H. R. B. and Colaco, M. J.), EngOpt 2008 – International Conference on Engineering Optimization, (ed: Herskovits, J.), Rio de Janeiro, Brazil, June 1-5, 2008.

  92. A Response Surface Method Based Hybrid Optimizer (with Colaco, J. M.), EngOpt 2008 – International Conference on Engineering Optimization, (ed: Herskovits, J.), Rio de Janeiro, Brazil, June 1-5, 2008.

  93. Inverse Estimation of Moisture Diffusivity by Utilizing Temperature Response of a Drying Body (with G. Kanevce, L. Kanevce, V. Mitrevski), ICCES’08: International Conference on Computational & Experimental Engineering and Sciences, Honolulu, Hawaii, March 17-22, 2008.

  94. Titanium Based Alloy Chemistry Optimization for Maximum Strength, Minimum Weight and Minimum Cost Using JMatPro and IOSO Software (with Kumar, A. and Egorov, I. N.), TMS Annual Meeting, Materials Informatics: Enabling Integration of Modeling and Experiments in Materials Science, ed: Rajan, K., New Orleans, LA, March 9-13, 2008.

  95. Approximation of the Likelihood Function in the Bayesian Technique for the Solution of Inverse Problems (with Orlande, H.R.B. and Colaco, M.J.), International Symposium on Inverse Problems, Design and Optimization (IPDO-2007), (eds.: Dulikravich, G.S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007

  96. Multiobjective Nonlinear Shape Optimization of Stent Based on Evolution Principles (with Annicchiarico, W.), International Symposium on Inverse Problems, Design and Optimization (IPDO-2007), (eds.: Dulikravich, G.S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.

  97. A Comparison of Two Methods for Fitting High Dimensional Response Surfaces (with Colaco, M. J. and Sahoo, D.), International Symposium on Inverse Problems, Design and Optimization (IPDO-2007), (eds.: Dulikravich, G.S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.

  98. Electro-Thermo-Hydrodynamic Control of Solidification of Binary Mixtures (with Colaco, M. J.), 9th International Symposium on Fluid Control, Measurement and Visualization – FLUCOME 2007, ed. Chen, C.-Y., Florida State University, Tallahassee, FL, Sept. 16-19, 2007.

  99. Statistical Modeling of Rarefied Gas Flows in Microchannels (with Gokaltun, S., Skudarnov, P. V. and Sukop, M. C.), paper AIAA-2007-4583, 18th AIAA Computational Fluid Dynamics Conference, Miami, FL, June 25-28, 2007.

  100. Lattice Boltzmann Method for Steady Gas Flows in Microchannels With Imposed Slip Wall Boundary Condition (with Gokaltun, S.), 5th International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM07), Universidad de la Americas, Puebla, Mexico, June 18-20, 2007.

  101. Inverse Approaches to Drying of Sliced Foods (with Kanevce, G. H., Kanevce, Lj. P., and Mitrevski, V. B.), International Symposium on Inverse Problems, Design and Optimization (IPDO-2007), (eds.: Dulikravich, G. S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.

  102. Inverse Approaches in Improvement of Air Pollution Plume Dispersion Models for Regulatory Applications (with Kanevce, G. H., Kanevce, Lj. P., and Andreevski, I. B.), International Symposium on Inverse Problems, Design and Optimization (IPDO-2007), (eds.: Dulikravich, G. S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.

  103. Projectile Shape Optimization for Desired Target Damage (with Moral, J. R. and Vignjevic, R.), International Symposium on Inverse Problems, Design and Optimization (IPDO-2007), (eds.: Dulikravich, G. S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.

  104. Controlling Solidification of Particle Laden Melts Using Thermo-Magnetohydrodynamics and Optimization (with Colaco, M. J.), Symposium on Processing for Reliability, (ed: Mullins, W. M.), Materials Science & Technology 2006, Cincinnati, OH, October 15-19, 2006.

  105. Evolutionary Wavelet Neural Network for Large Scale Function Estimation in Optimization (with Sahoo, D.), AIAA Paper AIAA-2006-6955, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, September 6-8, 2006.

  106. Multi-Objective Hybrid Evolutionary Optimization With Automatic Switching (with Moral, R. J. and Sahoo, D.), AIAA Paper AIAA-2006-6976, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, September 6-8, 2006.

  107. Inverse Approaches to Drying With and Without Shrinkage (with Kanevce, G., Kanevce, Lj., Mitrevski, V. and Orlande, H. R. B.), 15th International Drying Symposium (IDS 2006), Budapest, Hungary, August 20-23, 2006.

  108. Multi-Objective Design Optimization of Topology and Performance of Fractal Branching Networks of Cooling Passages, (with Gonzalez, M. J., Moral, R. J., Sahoo, D. and Martin, T. J. M.), ASME paper ICNMM2006-96151, ASME Fourth International Conference on Nanochannels, Microchannels and Minichannels, (eds.: Kandlikar, S.) University of Limerick, Limerick, Ireland, June 19-21, 2006.

  109. Evolutionary Optimization of Chemistry of Bulk Metallic Glasses (with Egorov, I. N. and Jelisavcic, N.), III European Conference on Computational Solid and Structural Mechanics (eds: Mota Soares, C. A., Martins, J.A.C., Rodrigues, H.C., Ambrosio, J.A.C., Pina, C.A.B., Mota Soares, C.M., Pereira, E.R.B. and Folgado, J.), Springer, Lisbon, Portugal, June 5-8, 2006.

  110. Optimizing Chemistry of Bulk Metallic Glasses for Improved Thermal Stability (with Egorov, I. N.), Symposium on Bulk Metallic Glasses, TMS 2006 Annual Meeting & Exhibition, eds: Liaw, P. K. and Buchanan, R. A., San Antonio, TX, March 12-16, 2006.

  111. Magnetohydrodynamic Optimization of the Fluid Flow During Solidification of Binary Mixtures in Enclosures (with Colaco, M. J.), 18th International Congress of Mechanical Engineering, Ouro Preto, Mato Groso, Brazil, November 6-11, 2005.

  112. Design Optimization of Networks of Cooling Passages (with Jelisavcic, N., Martin, T.J., Moral, R., Sahoo, D. and Gonzalez, M.), ASME paper IMECE2005-79175, ASME IMECE, Orlando, FL, November 5-11, 2005.

  113. Design of Alloy’s Concentrations for Optimized Strength, Temperature, Time-to-Rupture, Cost and Weight (with Egorov, I. N.), Sixth International Special Emphasis Symposium on Superalloys 718, 625, 706 and Derivatives, eds: Loria, E. A., TMS Publications, Pittsburgh, PA, October 2-5, 2005, pp. 419-428.

  114. Aero-Thermal-Elasticity-Materials Optimization of Cooled Gas Turbine Blades: Summary (with Martin, T. J., Dennis, B. H. and Egorov, I. N.), EUROGEN 05 – Evolutionary and Deterministic Methods for Design, Optimisation and Control with Applications to Industrial and Societal Problems, (eds: R. Schilling, W. Haase, J. Periaux, H. Baier, G. Bugeda), Munich, Germany, September 12-14, 2005.

  115. A Multi-Objective Evolutionary Hybrid Optimizer (with Moral, R. and Sahoo, D.), EUROGEN 05 – Evolutionary and Deterministic Methods for Design, Optimisation and Control with Applications to Industrial and Societal Problems, (eds: R. Schilling, W. Haase, J. Periaux, H. Baier, G. Bugeda), Munich, Germany, September 12-14, 2005.

  116. Self-Adapting Response Surface Optimization of Alloying Elements Concentrations for Specified Strength, Temperature, Time-to-Rupture, Cost and Weight (with Egorov, I. N.), Advances in Computational Mechanics and Optimization: Symposium in honor of Prof. Subrata Mukherjee’s 60th birthday, 8th National Congress of Computational Mechanics, Austin, TX, July 25-27, 2005.

  117. Energetics and Dynamical Pathways of Dislocation Cross-slip in Copper (with Pendurti, S., Lee, I.-H., and Jun, S.), 8th National Congress of Computational Mechanics, Austin, TX, July 25-27, 2005.

  118. Estimation of Spatially and Time Dependent Source Term in a Two-Region Problem (with Silva, P. P., Orlande, H. R. B., Colaco, M. J., Shiakolas, P. S.), 5th International Conference on Inverse Problems in Engineering: Theory and Practice, (ed. Lesnic, D.), Cambridge, U.K., July 11-15, 2005.

  119. Inverse Approaches to Drying of Bodies With Significant Shrinkage Effects (with G. H. Kanevce, L. P. Kanevce, V. B. Mitrevski, H.R.B. Orlande), 5th International Conference on Inverse Problems in Engineering: Theory and Practice, (ed. Lesnic, D.), Cambridge, UK, July 11-15, 2005.

  120. Robust Optimization of Concentrations of Alloying Elements in Steel for Maximum Temperature, Strength, Time-to-Rupture and Minimum Cost and Weight (with Yegorov-Egorov, I. N.), Invited Lecture, ECCOMAS – Computational Methods for Coupled Problems in Science and Engineering, (eds: Papadrakakis, M., Onate, E., Schrefler, B.), Fira, Santorini Island, Greece, May 25-28, 2005.

  121. Obtaining Pre-Specified Concentration Profiles in Thermosolutal Flows by Applying Magnetic Fields Having Optimized Intensity Distribution (with Colaco, M. J.), Invited Lecture, ECCOMAS – Computational Methods for Coupled Problems in Science and Engineering, (eds: Papadrakakis, M., Onate, E., Schrefler, B.), Fira, Santorini Island, Greece, May 25-28, 2005.

  122. A Multilevel Hybrid Optimization of Magnetohydrodynamic Problems in Double-Diffusive Fluid Flow (with Colaco, M. J.), SMEC 2005 Conference (ed: Saxena, S.), Miami Beach, FL, April 17-21, 2005.

  123. Inverse and Optimization Problems in Heat Transfer (with Colaco, M. J. and Orlande, H.R.B.), Invited Lecture, 10th Brazilian Congress of Thermal Sciences and Engineering – ENCIT2004, Rio de Janeiro, RJ, Brazil, November 29 – December 3, 2004.

  124. Aero-Thermal-Elasticity-Materials Optimization of Cooled Gas Turbine Blades: Part I (with Martin, T. J., Dennis, B. H. and Egorov, I. N.), in Lecture Series on Numerical Optimization Methods & Tools for Multi-Criteria/Multi-Disciplinary Design with Applications to Aeronautics and Turbomachinery, Von Karman Institute for Fluid Dynamics, Belgium, November 15 – 19, 2004.

  125. Aero-Thermal-Elasticity-Materials Optimization of Cooled Gas Turbine Blades: Part II (with Martin, T. J., Dennis, B. H. and Egorov, I. N.), in Lecture Series on Numerical Optimization Methods & Tools for Multi-Criteria/Multi-Disciplinary Design with Applications to Aeronautics and Turbomachinery, Von Karman Institute for Fluid Dynamics, Belgium, November 15 – 19, 2004.

  126. Inverse Determination of Steady Boundary Conditions in Heat Transfer and Elasticity (with Dennis, B. H., Martin, T. J.), Invited Lecture, mini-symposium on “Inverse Problems in Engineering Mechanics”, 6th World Congress on Computational Mechanics, Beijing, China, Sept. 5-10, 2004.

  127. Control of Flow Separation Over a Circular Cylinder With Electro-Magnetic Fields: Numerical Simulation, (with Dennis, B. H. and Yoshimura, S.), Invited Lecture, mini-symposium on “Computational Electro-magneto-hydro-dynamics”, 6th World Congress on Computational Mechanics, Beijing, China, Sept. 5-10, 2004.

  128. Optimization of Alloy Chemistry for Maximum Stress and Time-to-Rupture at High Temperature (with Yegorov-Egorov, I. N.), paper AIAA-2004-4348, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, Aug. 30 – Sept. 1, 2004.

  129. Convective Heat Transfer Control Using Magnetic and Electric Fields (with Colaco, M. J.), Keynote Lecture, International Thermal Science Seminar – ITSS II, ASME-ICHMT-ZSIS, (eds: Bergles, A. E., Golobic, I., Amon, C. H. and Bejan, A.), Bled, Slovenia, June 13-16, 2004, pp. 133-144.

  130. Inverse Problem of Aircraft Structural Parameter Estimation: Application of Neural Networks, (with Trivailo, P., Sgarioto, D. and Gilbert, T.), International Symposium on Inverse Problems, Design and Optimization – IPDO, Vol. II, (eds.: Cola�o, M.J., Dulikravich, G. S. and Orlande, H.R.B.), Rio de Janeiro, Brazil, March 17-19, 2004, pp. 330-337.

  131. Inverse Design of Alloys for Specified Stress, Temperature and Time-to-Rupture by Using Stochastic Optimization (with Yegorov-Egorov, I. N.), International Symposium on Inverse Problems, Design and Optimization – IPDO, (eds: Colaco, M. J., Dulikravich, G. S. and Orlande, H. R. B.), Rio de Janeiro, Brazil, March 17-19, 2004.

  132. Aerodynamic Data Modeling Using Support Vector Machines (with Fan, H.-Y. and and Han, Z.-X.), AIAA paper 03-13510, AIAA Aerospace Sciences Meeting, Reno, NV, January 10-13, 2004.

  133. Determination of Temperatures and Heat Fluxes on Surfaces and Interfaces of Multi-domain Three-Dimensional Electronic Components (with Dennis, B. H. and Han, Z.-X.), ASME paper IMECE2003-42273, Symposium on Cooling of Microlectronics, MEMS, Photonics, and Nano Devices, ASME IMECE 2003, Washington, DC, November 16-21, 2003.

  134. Optimization of Wall Electrodes for Electro-Hydrodynamic Control of Natural Convection Effects During Solidification (with Colaco, M. J. and Martin, T. J.), ASME paper IMECE2003-41703, ASME IMECE 2003, Washington, DC, November 16-21, 2003.

  135. An Analytical Model of Phase Changing Chemically Reacting Flows (with Colaco, M. J.), ASME paper IMECE2003-41702, ASME IMECE 2003, Washington, DC, November 16-21, 2003.

  136. A Comparison of Two Solution Techniques for the Inverse Problem of Simultaneously Estimating the Spatial Variations of Diffusion Coefficients and Source Terms (with Rodrigues, F. and Colaco, M. J. and Orlande, H. R. B.), ASME paper IMECE2003-42058, ASME IMECE 2003, Washington, DC, November 16-21, 2003.

  137. Improvements to Mutation Donor of Differential Evolution (with Fan, H.-Y. and Lampinen, J.), EUROGEN2003 – International Congress on Evolutionary Methods for Design, Optimization and Control with Applications to Industrial Problems, (eds: G. Bugeda, J. A- D�sid�ri, J. Periaux, M. Schoenauer and G. Winter), CIMNE, Barcelona, Spain, September 15-17, 2003.

  138. Reducing Convection Effects in Solidification by Applying Magnetic Fields Having Optimized Intensity Distribution (with Colaco, M. J. and Martin, T. J.), Keynote Lecture, ASME paper HT2003-47308, ASME Summer Heat Transfer Conference, Las Vegas, NV, July 21-23, 2003.

  139. An Inverse Method for Drying Processes at High Mass Transfer Biot Number (with Kanevce, G. and Kanevce, Lj.), ASME paper HT2003-40146, ASME Summer Heat Transfer Conference, Las Vegas, NV, July 21-23, 2003.

  140. Inverse Determination of Eroded Smelter Wall Thickness Variation Using an Elastic Membrane Concept (with Baker, D. P., Dennis, B. H. and Martin, T. J.), ASME paper HT2003-47307, ASME Summer Heat Transfer Conference, Las Vegas, NV, July 21-23, 2003.

  141. Optimization of Perfusion Freezing Protocols for Preservation of Three-Dimensional Organs (with Dennis, B. H.), 2003 Bioengineering Summer Conference, Key Biscayne, FL, June 26-31, 2003.

  142. Optimization of a Large Number of Coolant Passages Located Close to the Surface of a Turbine Blade (with Dennis, B. H., Egorov, I. N. and Yoshimura, S.), ASME paper GT2003-38051, ASME Turbo Expo 2003, Atlanta, GA, June 16-19, 2003.

  1. Parallel Thermoelasticity Optimization of 3-D Serpentine Cooling Passages in Turbine Blades (with Dennis, B. H., Egorov, I. N., Sobieczky, H. and Yoshimura, S.), ASME paper GT2003-38180, ASME Turbo Expo 2003, Atlanta, GA, June 16-19, 2003.

  2. Calibration of Microprocessor Control Systems for Specified Levels of Engine Exhaust Toxicity (with Egorov, I. N.), 2003 JUMV Conference – Science and Motor Vehicles, (ed: Duboka, C.), Belgrade, Serbia and Montenegro, May 27-28, 2003.

  3. Brain Cooling Strategies: Numerical Simulations on a Realistic Human Head Geometry (with Dennis, B. H., Eberhart, R. C. and Radons, S. W.), 5th International Conference on Simulations in Biomedicine, Ljubljana, Slovenia, April 2-4, 2003.

  4. Semi-Stochastic Optimization of Chemical Composition of High-Temperature Austenitic Steels for Desired Mechanical Properties (with Egorov, I. N., Sikka, V. K. and Muralidharan, G.), 2003 TMS Annual Meeting, Yazawa International Symposium: Processing and Technologies, TMS Publication, (eds: Kongoli, F., Itakagi, K., Yamaguchi, C. and Sohn, H.-Y.), Vol. 1, pp. 801-814, San Diego, CA, March 2-6, 2003.

  5. Optimization of Intensities and Orientations of Magnets Controlling Melt Flow During Solidification (with Colaco, J. M., Dennis, B. H., Martin, T. J. and Lee, S.), Symposium on Materials Processing Under the Influence of Electrical and Magnetic Fields, 2003 TMS Annual Meeting, San Diego, CA, March 2-6, 2003.

  6. Magnetized Fiber Orientation and Concentration Control in Solidifying Composites (with Colaco, M., Martin, T. J. and Lee, S.), Symposium on Materials Processing Under the Influence of Electrical and Magnetic Fields, 2003 TMS Annual Meeting, San Diego, CA, March 2-6, 2003.

  7. Non-Destructive Inverse Determination of Refractory Wall Material Wear Configurations in Melting Furnaces (with Baker, D. P., Martin, T. J. and Dennis, B.H.), 2003 TMS Annual Meeting, San Diego, CA, March 2-6, 2003.

  8. Estimation of Thermophysical Properties of a Drying Body at High Mass Transfer Biot Number (with Kanevce, G. and Kanevce, Lj.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’03, (ed: Tanaka, M.), Nagano, Japan, February 18-21, 2003, Elsevier, pp. 13-20.

  9. Inverse Determination of Smelter Wall Erosion Shapes Using a Fourier Series Method  (with Baker, D. P. and Martin, T. J.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’03, (ed: Tanaka, M.), Nagano, Japan, February 18-21, 2003,Elsevier, pp. 231-240.

  10. Finite Element Simulation of Cooling of 3-D Human Head and Neck (with Dennis, B. H., Eberhart, R. C. and Radons, S. W.), ASME IMECE 2002, paper IMECE2002-HT-32045, New Orleans, LA, November 17-22, 2002.

  11. Simultaneous Estimation of Spatially-Dependent Diffusion Coefficient and Source Term in Nonlinear 1-D Diffusion (with Rodrigues, F. A. and Orlande, H. R. B.), Workshop on Inverse Obstacle Problems, Lisbon, Portugal, November 4-6, 2002.

  12. Implicit and Explicit Sensitivities for Optimization of Cooled Turbine Blades (with Martin, T. J.), 9th AIAA/ISSMO Multidisciplinary Analysis & Optimization Symposium, paper AIAA-2002-5435, Atlanta, GA, Sept. 4-6, 2002.

  13. A 3-D Finite Element Formulation for the Determination of Unknown Boundary Conditions for Steady Thermoelastic Problems (with Dennis, B. H. and Yoshimura, S.), Keynote Lecture, mini-symposium on “Computational Treatment of Inverse Problems in Mechanics” at the 5th World Congress on Computational Mechanics (WCCM-V), Vienna, Austria, July 7 – 12, 2002.

  14. Multi-Disciplinary Hybrid and Evolutionary Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.), Invited Lecture, minisymposium on “Evolutionary Algorithms in Engineering Optimization”, at the 5th World Congress on Computational Mechanics (WCCM-V), Vienna, Austria, July 7 – 12, 2002.

  15. Parameterized Structures for Inverse Design and Optimization (with Sobieczky, H. and Dennis, B. H.), 4th International Conference on Inverse Problems in Engineering: Theory and Practice (4icipe), Angra dos Reis, Brazil, May 26-31, 2002.

  16. Estimation of Drying Food Thermophysical Properties by Using Temperature Measurements (with Kanevce, Lj. and Kanevce, G. H.), 4th International Conference on Inverse Problems in Engineering: Theory and Practice (4icipe), Angra dos Reis, Brazil, May 26-31, 2002.

  17. Estimation of Thermophysical Properties of Moist Materials Under Different Drying Conditions (with Kanevce, G. H., Kanevce, Lj. and Orlande, H. R. B.), 4th International Conference on Inverse Problems in Engineering: Theory and Practice (4icipe), Angra dos Reis, Brazil, May 26-31, 2002.

  18. Rotor Cascade Shape Optimization With Unsteady Passing Wakes Using Implicit Dual Time Stepping and Genetic Algorithm (with Lee, E.-S. and Dennis, B. H.), ASME ISROMAC-9 Conference, Hawaii, February 10-14, 2002.

  19. Inverse Determination of Steady Surface Temperatures and Heat Fluxes on Arbitrary 3-D Objects (with Dennis, B. H.), paper ASME IMECE2001/HTD-24310, New York, November 11-16, 2001.

  20. Analysis and Multi-disciplinary Optimization of Internal Coolant Networks in Turbine Blades (with Martin, T. J.), paper ASME IMECE2001/HTD-24316, New York, November 11-16, 2001.

  21. Multi-disciplinary Design Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.), Invited Lecture, EUROGEN 2001 – Evolutionary Methods for Design, Optimization and Control with Applications to Industrial Problems, (ed.: Giannakoglou, K., Tsahalis, D. T., Periaux, J. and Fogarty, T.), Athens, Greece, Sept. 19-21, 2001, Published by International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 11-18.

  22. Multi-disciplinary Analysis and Design Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.), Invited Lecture, Mini-Symposium on Inverse Problems – State of the Art and Future Trends, XXIV Brazilian Congress on Applied and Computational Mathematics, Sept. 10-13, 2001, Belo Horizonte, Brazil.

  23. Multi-disciplinary Inverse Design (with Martin, T. J. and Dennis, B. H.), Invited Lecture, Mini-Symposium on Inverse Problems – State of the Art and Future Trends, XXIV Brazilian Congress on Applied and Computational Mathematics, Sept. 10-13, 2001, Belo Horizonte, Brazil.

  24. Stokes’ Hypothesis and Compression Shock Structure, Proceedings of 23rd International Symposium on Shock Waves,(ed. Lu, F. and Wilson, D.), Fort Worth, Texas, July 23-27, 2001, pp. 158.

  25. Magnetic Field Suppression of Melt Flow in Crystal Growth (with Dennis, B. H.), International Symposium on Advances in Computational Heat Transfer – CHT’01, (eds.: de Vahl Davis, G. and Leonardi, E.), Palm Cove, Queensland, Australia, May 20-25, 2001, Begell House, Inc., New York, Vol. 2, pp. 1145-1152.

  26. Simultaneous Estimation of Thermophysical Properties and Heat and Mass Transfer Coefficients of a Drying Body (with Kanevce, G. H. and Kanevce, Lj.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’01, (eds: Tanaka, M. and Dulikravich, G. S.), Nagano, Japan, February 6-9, 2001, Elsevier, Amsterdam, pp. 3-12.

  27. A 3-D Finite Element Formulation for the Determination of Unknown Boundary Conditions in Heat Conduction (with Dennis, B. H.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’01, (eds: Tanaka, M. and Dulikravich, G. S.), Nagano, Japan, February 6-9, 2001.

  28. Electromagnetohydrodynamics (EMHD): Numerical Experiments in Steady Planar Flows (with Dennis, B. H.), Symposium on Recent Advances in the Mechanics of Structured Continua, (eds: Massoudi, M. and Rajagopal, K. R.), ASME IMECE 2K, Orlando, FL, Nov. 5-10, 2000, AMD-Vol. 244/MD.-Vol. 92, pp. 17-24.

  29. Optimization of Organ Freezing Protocols With Specified Allowable Thermal Stress Levels (with Dennis, B. H. and Rabin, Y.), Symposium on Advances in Heat and Mass Transfer in Biotechnology, (eds: Scott, E. P. and Bischof, J. C.), ASME IMECE 2K, Orlando, FL, Nov. 5-10, 2000, HTD-Vol. 368/BED-Vol. 47, pp. 33-48.

  30. Simulation of Magnetohydrodynamics With Conjugate Heat Transfer (with Dennis, B. H.), ECCOMAS2000 (European Congress on Computational Methods in Applied Sciences and Engineering), (ed: Onate, E., Bugeda, G. and Suarez, B.), Barcelona, Spain, September 11-14, 2000.

  31. Inverse Design and Optimization Using CFD (with Dennis, B. H.), Session on Contributions to Automated Design Using CFD, ECCOMAS2000 European Congress on Computational Methods in Applied Sciences and Engineering, (eds: Onate, E., Bugeda, G. and Suarez, B.), Barcelona, Spain, September 11-14, 2000, pp. 595.

  32. Multi-Objective Optimization of Turbomachinery Cascades for Minimum Loss, Maximum Loading, and Maximum Gap-to-Chord Ratio (with Dennis, B. H., Egorov, I. N., Han, Z.-X., and Poloni, C.), AIAA Paper 2000-4876, 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, September 6-8, 2000.

  33. Moisture Diffusivity Estimation from Temperature Measurements: Influence of Measurement Accuracy (with Kanevce, G. H., Kanevce, Lj. P. and Mitrevski, V. B.), 12th International Drying Symposium (IDS2000), Noordwijkerhout, The Netherlands, August 28-31, 2000.

  34. Heat Transfer, Inverse Problems, and Multidisciplinary Design Optimization (with Martin, T. J. and Dennis. B. H.), Proceedings of a Conference of International Society for Computational Engineering & Sciences (ISCES), Los Angeles, CA, August 21-25, 2000, (editors: Atlury, S. N. and Brust, F. W.), Vol. I, Tech Science Press, pp. 868-873.

  35. Influence of Boundary Conditions on Moisture Diffusivity Estimation by Temperature Response of a Drying Body (with Kanevce, G. H. and Kanevce, Lj. P.), ASME National Heat Transfer Conference, Pittsburgh, PA, August 20-22, 2000, ASME paper NHTC2000-12296.

  36. Inverse Determination of Temperature-Dependent Thermal Conductivity Using Steady Surface Data on Arbitrary Objects (with Martin, T. J.), Symposium on Inverse Thermal Problems, ASME National Heat Transfer Conference, (editors: G. S. Dulikravich, K. Woodbury and B. F. Blackwell), Pittsburgh, PA, August 20-22, 2000, ASME paper NHTC2000-12038.

  37. Simulation of Electro-Magneto-Hydro-Dynamics (EMHD) with p-Version Least-Squares Finite Element Method (with Dennis, B. H.), International Conference on Finite Elements in Flow Problems 2000, Austin, TX, April 30 – May 4, 2000.

  38. Determination of Unsteady Container Temperatures During Freezing of Three-dimensional Organs With Constrained Thermal Stresses (with Dennis, B. H.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’2k, (editors: M. Tanaka and G. S. Dulikravich), Nagano, Japan, March 7-10, 2000, Elsevier Science Ltd, Amsterdam, pp. 139-148.

  39. Moisture Diffusivity Estimation by Temperature Response of a Drying Body (with Kanevce, G. H. and Kanevce, Lj. P.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’2k, (editors: M. Tanaka and G. S. Dulikravich), Nagano, Japan, March 7-10, 2000, Elsevier Science Ltd, Amsterdam, pp. 43-52.

  40. Metamodel Integration Technology for Multidisciplinary Design (with Barton, R. R.), 2000 NSF Design & Manufacturing Grantees Conference, Vancouver, Canada, January 5-8, 2000.

  41. Non-Reflective Boundary Conditions for a Consistent Model of Axisymmetric Electro-Magneto-Hydrodynamic Flows (with Ko, H.-J.), Symposium on Rheology and Fluid Mechanics of Nonlinear Materials, ASME IMECE’99, Editor: D. A. Siginer, Nashville, TN, November 14-19, 1999, ASME FED-Vol. 249, pp. 97-104.

  42. Maximizing Multistage Axial Gas Turbine Efficiency Over a Range of Operating Conditions (with Petrovic, M. V. and Martin, T. J.), Proceedings of 10TH Thermal & Fluids Analysis Workshop (TFAWS’99), Ed: L. W. Griffin, NASA Marshall Space Flight Center, Huntsville, AL, Sept. 13-17, 1999.

  43. Non-Reflective Boundary Conditions for a Consistent Two-dimensional Planar Electro-Magneto-Hydrodynamic Flow Model (with H.-J. Ko), Forum on Functional Fluids, 1999 Joint ASME/JSME Fluids Engineering Conference, Editors: G. S. Dulikravich, S. Sawada, and K. Yamane, San Francisco, CA, July 18 – 23, 1999.

  44. Multidisciplinary Inverse Problems (with Martin, T. J. and Dennis, B. H.), Invited Lecture, 3rd International Conference on Inverse Problems in Engineering (3icipe): Theory and Practice, Editor: K. Woodbury, Port Ludlow-Puget Sound, WA, June 13-18, 1999; ASME Engineering Foundation, pp.1-8.

  45. Metamodel Integration Technology for Multidisciplinary Design, (with R. R. Barton), 1999 NSF Design & Manufacturing Grantees Conference, Los Angeles, CA, January 5-8, 1999.

  46. Multidisciplinary Inverse Design and Optimization of Gas Turbine Blades, 1999 NSF Design & Manufacturing Grantees Conference, Los Angeles, CA, January 5-8, 1999.

  47. Simultaneous Determination of Temperatures, Heat Fluxes, Deformations, and Tractions on Inaccessible Boundaries (with B. H. Dennis), Symposium on Inverse Problems in Mechanics, ASME IMECE’98, Editors: L. G. Olson and S. Saigal, Anaheim, CA, Nov. 15-20, 1998, ASME AMD-Vol. 228, pp. 1-10.

  48. A Fully Non-Linear Theory of Electro-Magneto-Hydrodynamics (with H.-J. Ko), Symposium on Rheology and Fluid Mechanics of Non-Linear Materials, ASME IMECE’98, Editors: D. A. Siginer and D. De Kee, Anaheim, CA, Nov. 15-20, 1998, ASME FED-Vol. 246/MD-Vol.81, pp. 173-182.

  49. Aero-Thermal Optimization of Internally Cooled Turbine Blades (with T. J. Martin and Z.-X. Han), Minisymposium on Multidisciplinary-Optimum Design, Fourth ECCOMAS Computational Fluid Dynamics Conference, Editors: K. Papailiou, D. Tsahalis, J. Periaux, D. Knoerzer, Athens, Greece, September 7-11, 1998, Vol. 2, pp.158-161, John Wiley & Sons, New York.

  50. Aero-Thermo-Structural Design Optimization of Cooled Turbine Blades (with T. J. Martin, B. H. Dennis, E.-S. Lee, and Z.-X. Han), AGARD – AVT Propulsion and Power Systems Symposium on Design Principles and Methods for Aircraft Gas Turbine Engines, NATO-RTO-MP-8 AC/323(AVT)TP/9, Ch. 35, Toulouse, France, May 11-15, 1998.

  51. Fourier Series Analytical Solution for Inverse Design of Aerodynamic Shapes (with D. P. Baker), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’98, Editors: M. Tanaka and G.S. Dulikravich, Nagano City, Japan, March 24-27, 1998, Elsevier Science, pp. 427-436.

  52. A Finite Element Formulation for the Detection of Boundary Conditions in Elasticity and Heat Transfer (with B. H. Dennis), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’98, Editors: M. Tanaka and G. S. Dulikravich, Nagano, Japan, March 24-27, 1998, Elsevier Science, pp. 61-70.

  53. Boundary Conditions for Electro-Magneto-Hydrodynamics (with Y.-H. Jing ), Symposium on Rheology and Fluid Mechanics of Non-Linear Materials, Editors: S. G. Advani and D. A. Siginer, ASME IMECE’97, Dallas, TX, Nov. 16-21, 1997, ASME FED-Vol. 243/MD-Vol. 78, pp. 101-117.

  54. Thermo-Elastic Analysis and Optimization Environment for Internally Cooled Turbine Airfoils (with B. H. Dennis), XIII International Symposium on Airbreathing Engines (XIII ISABE), Editor: F. S. Billig, Chattanooga, TN, Sept. 8-12, 1997, ISABE 97-7181, Volume 2, pp. 1335-1341.

  55. Aero-Thermal Analysis and Optimization of Internally Cooled Turbine Airfoils (with T. J. Martin), XIII International Symposium on Airbreathing Engines (XIII ISABE), Editor: F. S. Billig, Chattanooga, TN, Sept. 8-12, 1997, ISABE 97-7165, Volume 2, pp. 1232-1250.

  56. Inverse Determination of Steady Local Convective Heat Transfer Coefficients (with T. J. Martin), Symposium on Inverse Design Problems in Heat Transfer and Fluid Flow, Editors: G. S. Dulikravich and K. A. Woodbury, ASME National Heat Transfer Conference, Baltimore, MD, August 10-12, 1997, ASME HTD-Vol. 340, Volume 2, pp. 151-158.

  57. Non-Iterative Inverse Determination of Temperature-Dependent Heat Conductivities (with T. J. Martin), Symposium on Inverse Design Problems in Heat Transfer and Fluid Flow, Editors: G. S. Dulikravich and K. A. Woodbury, ASME National Heat Transfer Conference, Baltimore, MD, August 10-12, 1997, ASME HTD-Vol. 340, Volume 2, pp. 141-150.

  58. Multidisciplinary Inverse Problems and Solution Methods, (Invited Lecture with T. J. Martin), Advanced Technology in Experimental Mechanics – ATEM97, Editor: Y. Morimoto, Wakayama City, Osaka, Japan, July 25-26, 1997, pp. 83-88.

  59. Software for Solving Thermoelastic Problems on Arbitrary Domains Using Multigrid and Adaptive Mesh Refinement (with Dennis, B. H.). Third IMACS International Symposium on Iterative Methods in Scientific Computation, Jackson, WY, July 9-12, 1997.

  60. Inverse Determination of Boundary Conditions in Multi-domain Heat Transfer Problems, (Invited Lecture with T. J. Martin), BETECH ’97 – 9th International Conference on Boundary Element Technology, Editor: J. Frankel, Knoxville, TN, April 9-11, 1997, pp. 99-110.

  61. Multidisciplinary Inverse Design and Optimization of Turbine Blades, 1997 National Science Foundation Design and Manufacturing Grantees Conference, Seattle, WA, January 7-10, 1997, pp. 29-30.

  62. Inverse Determination of Temperatures and Heat Fluxes on Surfaces of 3-D Objects (with T. J. Martin), PanAmerican Congress of Applied Mechanics (PACAM-V), San Juan, Puerto Rico, January 2-4, 1997, in Applied Mechanics in the Americas, Editors: M. Rysz, L. A. Godoy and L. E. Suarez, The University of Iowa, Iowa City, Vol. 5, pp. 133-136.

  63. Aero-Thermal-Structural Optimization (with T. J. Martin and B. H. Dennis), NASA/ICOMP 1996 Coolant Flow Management Workshop, Cleveland, Editors: S. Hippensteele and J. Gladden, OH, December 12-13, 1996, NASA Conference CP 10195, pp. 311-334.

  64. Determination of Temperatures and Heat Fluxes on Surfaces of Multidomain Three-Dimensional Electronic Components (with T. J. Martin), Symposium on Application of CAE/CAD to Electronic Systems, Editors: D. Agonafer, R. E. Fulton, G. J. Kowalski and P. Cierkus, 1996 ASME Int. Mechanical Engineering Congress and Exposition, Atlanta, GA, November 17-22, 1996, ASME EEP-Vol. 18, pp. 1-10.

  65. Fully Conservative Forms of a System of Unified Electro-Magneto-Hydrodynamic Equations (with Y.-H. Jing), Symposium on Rheology and Fluid Mechanics of Nonlinear Materials, Editors: D. A. Siginer and S. G. Advani, 1996 ASME International Mechanical Engineering Congress and Exposition, Atlanta, GA, November 17-22, 1996, AMD-Vol. 217, pp. 309-314.

  66. Finding Temperatures and Heat Fluxes on Inaccessible Surfaces in 3-D Coated Rocket Nozzles (with T. J. Martin), 1995 JANNAF Non-Destructive Evaluation Propulsion Subcommittee Meeting, Tampa, FL, Dec. 4-8, 1995, Chemical Propulsion Information Agency – CPIA Publication 637, Dec. 1995, pp. 119-129.

  67. Electro-Magneto-Hydrodynamics: Part 2 – A Survey of Mathematical Models (with S. R. Lynn), Symposium on Developments in Electrorheological Flows-1995, Editors: D. A. Siginer and G. S. Dulikravich, ASME WAM’95, San Francisco, CA, November 12-17, 1995, ASME FED-Vol. 235, MD-Vol. 71, pp. 59-70.

  68. Electro-Magneto-Hydrodynamics: Part 1 – Introductory Concepts (with S. R. Lynn), Symposium on Developments in Electrorheological Flows-1995, Editors: D. A. Siginer and G. S. Dulikravich, ASME WAM’95, San Francisco, CA, November 12-17, 1995, ASME FED-Vol. 235, MD-Vol. 71, pp. 49-58.

  69. Inverse Determination of Boundary Conditions in Steady Heat Conduction With Heat Generation (with T. J. Martin), Symposiums on Conjugate Heat Transfer, Inverse Problems, and Optimization, and Inverse Problems in Heat Transfer, Editors: W. J. Bryan and J. V. Beck, ASME National Heat Transfer Conference, Portland, OR, August 6-8,1995, ASME HTD-Vol. 312, pp. 39-46.

  70. Magnetic Field Control of Vorticity in Steady Incompressible Laminar Flows (with K.-Y. Choi and S. Lee), Symposium on Developments in Electrorheological Flows and Measurement Uncertainty 1994, ASME WAM’94,  Editors: D. A. Siginer, J. H. Kim, S. A. Sheriff and H. W. Colleman, Chicago, IL, November 6-11,1994, ASME FED-Vol. 205/AMD-Vol. 190, pp. 125-142.

  71. An Interactive Multidisciplinary Analysis, Design & Optimization (MDA&O) Approach to Electronic Packaging (with N. F. Foster, T. J. Martin and J. D. Halderman), Symposium on CAE/CAD Application to Electronic Packaging, ASME WAM’94, Eds: D. Agonafer and R. E. Fulton, Chicago, IL, November 6-11,1994, ASME EEP-Vol. 9, pp. 15-24.

  72. An Inverse Method for Finding Unknown Surface Tractions and Deformations in Elastostatics (with J. D. Halderman and T. J. Martin), Symposium on Inverse Problems in Mechanics, ASME WAM’94, Editors: S. Saigal and L. G. Olson, Chicago, IL, November 6-11,1994, ASME AMD-Vol. 186, pp. 57-66.

  73. Inverse Problems and Design in Heat Conduction (with T. J. Martin), 2nd IUTAM International Symposium on Inverse Problems in Engineering Mechanics, Editors: H. D. Bui, M. Tanaka, M. Bonnet, H. Maigre, E. Luzzato and M. Reynier, Paris, France, November 2-4, 1994, A. A. Balkema, Rotterdam, 1994, pp. 13-20.

  74. Convergence Rate Enhancement of Navier-Stokes Codes on Clustered Grids (with K.-Y. Choi), 6th Annual Symposium of the Penn State – NASA Propulsion Eng. Research Center, NASA Lewis Research Center, Cleveland, OH, September 13-14, 1994, pp. 177-181.

  75. Finding Unknown Surface Temperatures and Heat Fluxes in Steady Heat Conduction (with T. J. Martin), 4th Intersociety Conference on Thermal Phenomena in Electronic Systems, Editors: A. Ortega and D. Agonafer, Washington, D. C., May 4-7, 1994, pp. 214-221.

  76. Convergence Acceleration of Iterative Algorithms Using a Sensitivity-Based Minimal Residual (SBMR) Method (with K. Y. Choi), 12th Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion, NASA Marshall Space Flight Center, Huntsville, AL, April 19-21, 1994.

  77. Inverse Determination of Temperatures and Heat Fluxes on Inaccessible Surfaces (with T. J. Martin), 9th International Conference on Boundary Element Technology – BETECH 94, Computational Mechanics Publications, Southampton, Eds: C. Brebbia and A. Kassab, Orlando, FL, March 16-18, 1994, pp. 69-76.

  78. Dielectric Fluids Solidification With Charged Particles in Electric Fields and Reduced Gravity (with V. Ahuja), ASME WAM’94, Symposium on Heat Transfer in a Microgravity, Editors:  C. T. Avedisian and V. S. Arpaci, New Orleans, LA, November 29-December 3, 1993, ASME HTD-Vol. 269, pp. 119-130.

  79. Inverse Design of Threedimensional Shapes With Overspecified Thermal Boundary Conditions, Monograph on Inverse Problems in Mechanics, Editor: S. Kubo, Atlanta Technology Publications, Atlanta, GA, September1993, pp. 280-140.

  80. Reliability Enhancement of Navier-Stokes Codes Through Convergence Enhancement (with K.-Y. Choi), 5th Annual Symposium of the Penn State – NASA Propulsion Engineering Research Center, Editor: C. L. Merkle, University Park, PA, Sept. 8-9, 1993, pp. 173-178.

  81. A Direct Approach to Finding Unknown Boundary Conditions in Steady Heat Conduction (with T. J. Martin), 5th Annual Thermal and Fluids Analysis Workshop, Ohio Aerospace Institute-NASA Lewis Research Center, Editor: D. Darling, Brookpark, OH, August 16-20, 1993, NASA CP-10122, pp. 137-149.

  82. Three-Dimensional Solidification and Melting Using Magnetic Field Control (with V. Ahuja), 5th Annual Thermal and Fluids Analysis Workshop, Ohio Aerospace Institute-NASA Lewis Research Center, Editor: D. Darling, Brookpark, OH, August 16-20, 1993, NASA CP-10122, pp. 449-466.

  83. Unsteady Three-Dimensional Thermal Field Prediction In Turbine Blades Using Nonlinear BEM (with T. J. Martin), 5th Annual Thermal and Fluids Analysis Workshop,  Ohio Aerospace Institute-NASA Lewis Research Center, Editor: D. Darling, Brookpark, OH, August 16-20, 1993, NASA CP-10122, pp. 467-476.

  84. Simulation of Electrohydrodynamic Enhancement of Laminar Flow Heat Transfer (with V. Ahuja and S. Lee), ASME National Heat Transfer Conference, Symposium on Fundamentals of Heat Transfer in Electromagnetic, Electrostatic, and Acoustic Fields, Editors: Y. Bayazitoglu and V. S. Arpaci, Atlanta, GA, August 8-11, 1993, ASME HTD-Vol. 248, pp. 43-52.

  85. Computer Simulation of Free Flow Electrophoretic Separation (with S. Lee and V. Ahuja), 2nd International Conference on Fluid Mechanics (ICFM-II), Editor: Zhang Zhaosun, Beijing, P. R. China, July 7-10, 1993.

  86. Computations of Electro-Thermo-Convective Phenomena in Electro-Rheological Fluids (with S. Lee and V. Ahuja), ASME Fluids Engineering Conference, Symposium on Electro-Rheological Flows, Eds:  D. A. Siginer, J. H. Kim and R. A. Bajura, Washington, D. C., June 21-24, 1993, ASME FED-Vol. 164, pp. 29-42.

  87. Transonic Airfoil Thickness Variation Requirements for Maintaining Shock-Free Flow (with H. Sobieczky), Smart Structures and Materials ’93, Editors: N. W. Hagood and G. J. Knowles, Albuquerque, N.M., February1-4, 1993, SPIE Vol. 1917, pp. 119-124.

  88. Three-Dimensional Control of Crystal Growth Using Magnetic Fields (with V. Ahuja), Smart Structures and Materials ‘93, Smart Materials, Editor: V. K. Varadan, Albuquerque, N.M., February 1-4, 1993, SPIE Vol. 1916, pp. 65-75.

  89. Electrohydrodynamic Flow Simulation, Pan American Congress of Applied Mechanics (PACAM-III), Eds: M. R. M. Crespo da Silva, D. T. Mook, D. L. Zagottis, Sao Paulo, Brazil, Jan. 4-8, 1993, pp. 303-306.

  90. Inverse Design of Super Elliptic Coolant Passages in Coated Turbine Blades With Specified Temperatures and Heat Fluxes (with T. J. Martin), AIAA paper 92-4714, 4th AIAA/Air Force/NASA/OAI Symposium of Multidisciplinary Analysis and Optimization, Cleveland, OH, September 21-23, 1992, pp.

  91. Determination of the Proper Number, Locations, Sizes and Shapes of Superelliptic Coolant Flow Passages in Turbine Blades (with T. J. Martin), Proceedings of ICHMT International Symposium on Heat Transfer in Turbomachinery, August 24-28, 1992, Athens, Greece, in Heat Transfer in Turbomachinery, Eds: R. J. Goldstein, A. I. Leontiev, D. E. Metzger, Begell House, Inc., New York, pp. 31-42.

  92. Magnetized Fiber Orientation Control in Solidifying Composites: Numerical Simulation, (with B. Kosovic), 9th National Heat Transfer Conference, Symposium on Transport Phenomena in Materials Processing and Manufacturing, San Diego, CA, Aug. 9-12, 1992, ASME/HTD-Vol. 196, pp. 135-144.

  93. Unsteady Solidification in Microgravity (with B. Kosovic), 9th National Heat Transfer Conference, Symposium on Topics in Heat Transfer, Eds: R. S. Downing, L. Haas, S. Chellaiah, E. E. Anderson, K. Vafai, W. S. Chang and G. R. Cunnington, ASME/HTD-Vol. 206-3, San Diego, CA, Aug. 9-12, 1992, pp. 13-20.

  94. Aerodynamic Shape Optimization of Hypersonic Configurations Including Viscous Effects (with S. Sheffer), AIAA paper 92-2635, AIAA 10th Applied Aerodynamics Conference, Palo Alto, June 22-24, 1992, pp. 343-351.

  95. Inverse Shape Design and Optimization in Aerothermodynamics, 4th Annual Symposium on Inverse Problems in Engineering, Editor: J. V. Beck, Michigan State University, East Lansing, MI, June 11-12, 1992, pp. 112-127.

  96. Reliability Enhancement of Navier-Stokes Codes Through Convergence Enhancement (with C. Merkle, S. Venkateswaran, K. Choi and P. Buelow), Conference on Advanced Earth-to-Orbit Propulsion Technology, Editors:  R. J. Richmond and S. T. Wu, NASA MSFC, Huntsville, AL, May 19-21, 1992, NASA CP-3174, Vol. 2, pp. 114-123.

  97. Determination of Void Shapes, Sizes and Locations Inside an Object with Known Surface Temperature and Heat Flux (with T. J. Martin), IUTAM Symposium on Inverse Problems in Engineering Mechanics, Tokyo, Japan, May 11-16, 1992, Editors: M. Tanaka and H. D. Bui, Springer-Verlag, 1993, pp. 489-496.

  98. Inverse Design of Proper Number, Shapes, Sizes and Locations of Coolant Flow Passages, 10th Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion, NASA Marshall Space Flight Center, Huntsville, AL, April 28-30, 1992, NASA CP-3163, Part 1, pp. 467-486.

  99. Solidification in Reduced Gravity With Magnetic Fields and Temperature-Dependent Physical Properties (with B. Kosovic and S. Lee), ASME WAM ’91, Symposium on Heat and Mass Transfer in Solidification Processing, Atlanta, GA, Dec. 1-6, 1991, Editors: G. S. Advani and C. Beckermann, HTD-Vol. 175/MD-Vol. 25, pp. 61-73.

  100. Aerodynamic Shape Optimization of Arbitrary Hypersonic Vehicles (with S. Sheffer), 3rd Int. Conf. on Inverse Design Concepts and Optimization in Engineering Sciences (ICIDES-III), Editor: G. S. Dulikravich, Washington, DC, Oct. 23-25, 1991, pp. 347-358.

  101. Freezing Under the Influence of a Magnetic Field:  Computer Simulation (with B. Kosovic and S. Lee), 1991 ICHMT International Symposium on Macroscopic and Microscopic Heat & Mass Transfer in Biomedical Eng., Athens, Greece, Sept. 2-6, 1991, Editors: K. R. Diller and A. Shitzer, Hemisphere Publishing Co., 1992, pp. 337-356.

  102. Computation of Magnetohydrodynamic Flows With Joule Heating and Buoyancy (with S. Lee), International Aerospace Congress, Melbourne, Australia, May 13-17, 1991.

  103. Interaction of a Magnetic Field With Blood Flow (with B. Kosovic and S. Lee), 17th Annual Northeast Bioengineering Conference, University of Connecticut, Hartford, CT, April 4-5, 1991, pp. 79.

  104. Computer Simulation of Electrophoretic Separation Processes, (with B. Kosovic and S. Lee), 17th Annual Northeast Bioengineering Conference, Univ. of Connecticut, Hartford, CT, April 4-5, 1991, pp. 89.

  105. Reliability Enhancement of Navier-Stokes Codes Through Convergence Acceleration (with S. Lee), 2nd Pan-American Congress of Applied Mechanics (PACAM), Editors: D. Mook and P. Kittl, Valpareiso, Chile, January 2-5, 1991, pp. 433-435.

  106. Acceleration of Iterative Algorithms Using Distributed Minimal Residual Method (with S. Lee), 2nd World Congress on Computational Mechanics, Editor: I. Doltsinis, Stuttgart, F. R. Germany, August 27-31, 1990, pp. 280-131.

  107. Grid Generation Using a Posteriori Optimization With Geometrically Normalized Functionals (with B. W. Siebert), AIAA paper 90-3048, AIAA Applied Aerodynamics Conference, Portland, OR, Aug. 20-22, 1990, pp. 917-924.

  108. Aerodynamic Shape Optimization of Hypersonic Missiles (with R. Buss, E. Strang and S. Lee), AIAA paper 90-3073, AIAA Applied Aerodynamics Conference, Portland, OR, Aug. 20-22, 1990, pp. 840-845.

  109. Accelerated Computation of Viscous Incompressible Flows With Heat Transfer (with S. Lee), First International Conference on Experimental and Computational Aerothermodynamics of Internal Flows, Editor: Chen, N.-X. and Jiang, H.-D., Beijing, P.R. China, July 7-11, 1990, pp. 25-34.

  110. Shape Determination Via Optimization in Multiply Connected Domains, 3rd Annual Inverse Problems in Engineering Seminar, Ed: J. V. Beck, Michigan State Univ., East Lansing, MI, June 25-26, 1990. pp. 75-86.

  111. A Stream-Function-Coordinate (SFC) Concept in Aerodynamic Shape Design, AGARD Specialist Workshop on Inverse Methods in Airfoil Design for Aeronautical and Turbomachinery Applications, AGARD-R-780, Editor: R. V. D. Braembussche, VKI, Brussels, Belgium, May 14-18, 1990, pp. 6.1-6.6.

  112. Aerodynamic Shape Design, AGARD Specialist Workshop on Inverse Methods for Airfoil Design for Aeronautical and Turbomachinery Applications, AGARD-R-780, Editor: R. V. D. Braembussche, VKI, Brussels, Belgium, May 14-18, 1990, pp. 1.1-1.10.

  113. Distributed Minimal Residual (DMR) Method for Acceleration of Iterative Algorithms (with S. Lee), CFD Symposium on Aeropropulsion, Editors: M.-S. Liou and L. I. Povinelli, NASA Lewis Research Center, Cleveland, OH, April 24-26, 1990, NASA CP 3078, pp. 259-279.

  114. Computer Simulation of Convective Cooling Effectiveness Inside Turning Passages (with S. Lee), 16th Northeast Bioengineering Conference, Editor: R. Gaumont, Penn State University, University Park, PA, March 26-27, 1990, pp. 27-28.

  115. A Fast Iterative Algorithm for Incompressible Navier-Stokes Equations, (with S. Lee), Proceedings of 10th Brazilian Congress of Mechanical Engineering, Editor: A. M. D. de Figueiredo, Rio de Janeiro, Brazil, December 7-10, 1989, Vol. 1, pp. 193-195.

  116. An Active Control System for Thermal Fields in Hypothermic Processes (with C. Ambrose and L. J. Hayes), National Heat Transfer Conference, Philadelphia, PA, Aug. 6-9, 1989, Editor: S. B. Yilmaz, AIChE Symposium Series 269, Vol. 85, pp. 440-405.

  117. Cryopreservation Perfusion Flow Simulation Using Navier-Stokes Equations (with S. Lee), CRYO ’89 Cryobiology Society 26th Annual Meeting, Charleston, SC, June 11-16, 1989, Abstract no. 136.

  118. Physically Consistent Artificial Dissipation for Computational Fluid Dynamics, 7th International Conference on Finite Elements in Flow Problems, Editor: T. J. Chung, Huntsville, AL, April 3-7, 1989, pp. 1199-1204.

  119. Control of Interior Cooling Rates in Heterogeneous Materials by Varying, Surface Thermal Boundary Conditions (with J. V. Madison and L. J. Hayes), 1st Pan-American Congress of Applied Mechanics (PACAM), Editors: C. R. Steele and L. Bevilacqua, Rio de Janeiro, Brazil, January 3-6, 1989, pp. 420-423.

  120. Control of Surface Temperatures to Optimize Survival in Cryopreservation, (with L. J. Hayes), ASME WAM’88, Chicago, IL, Nov. 27 – Dec. 2. 1988, Symposium on Computational Methods in Bioengineering, Editors: R. L. Spilker and B. R. Simon, ASME BED -Vol. 9, pp. 255-265.

  121. Iterative Acceleration and Physically Based Dissipation for Euler Equations of Gasdynamics (with D. J. Dorney and S. Lee), ASME WAM’88, Chicago, IL, Nov. 27 – Dec. 2. 1988, Symposium on Advances and Applications in Computational Fluid Dynamics, Ed.,: O. Baysal, ASME FED – Vol. 66, pp. 81-92.

  122. Distributed Minimal Residual (DMR) Method for Explicit Algorithms Applied to Nonlinear Systems (with S. Lee and D. J. Dorney), Conference on Iterative Methods for Large Linear Systems, Editor: D. Kinkaid, Austin, TX, Oct. 19-21, 1988, pp. 13.

  123. A Cavitation Theory Based on Gasdynamic Formulation, Conference on Hydraulic Machinery, Editor: B. Velensek, Ljubljana, Yugoslavia, Sept. 13-15, 1988, pp. 353-360.

  124. Physically Consistent Models for Artificial Dissipation in Transonic Potential Flow Computations (with K. W. Mortara and L. Marraffa), AIAA Paper 88-3653, First National Fluid Dynamics Congress, Cincinnati, OH, July 24-28, 1988, Volume I, pp. 280-287.

  125. Optimization of Container Wall Temperature Variation During Transplant Tissue Cooling (with J. V. Madison and L. J. Hayes), International Conference on Inverse Design Concepts and Optimization in Eng. Sciences (ICIDES-II), Editor: G. S. Dulikravich, Penn State Univ., University Park, PA, Oct. 26-28, 1987, pp. 321-336.

  126. Computations of Unsteady Dissociating Nitrogen Flows (with L. Marraffa and G. S. Deiwert), 7th GAMM Conference on Numerical Methods in Fluid Mechanics, Louvain-la-Neuve, Belgium, Sept. 9-11, 1987, Editor: M. Deville, in Notes on Fluid Mechanics, Vieweg, Braunschweig, 1988, Vol. 20, pp. 211-218.

  127. Numerical Simulation of Two-Dimensional Viscous Unsteady Dissociating Nitrogen Flows (with L. Marraffa and G. S. Deiwert), AIAA paper 87-2549-CP, AIAA 5th Applied Aerodynamics Conference, Monterey, CA, Aug. 17-19, 1987.

  128. Acceleration of Explicit Multi-Stepping Algorithms, First International Conference on Industrial and Applied Mathematics, Paris, France, June 29-July 3, 1987, Book of Abstracts, pp. 130.

  129. Inverse Design and Optimization of Cryopreservation Procedures (with L. J. Hayes and T. L. Chiang), 2nd ASME-JSME Thermal Engineering Joint Conference, Honolulu, Hawaii, March 22-27, 1987; ASME Book #I02195, pp. 525-529.

  130. Inverse Design of Coolant Flow Passages in Ceramically Coated Scram-Jet Combustor Struts (with T. L. Chiang and L. J. Hayes), ASME WAM’86, Symposium on Numerical Methods in Heat Transfer, Editors: Chen and K. Vafai, Anaheim, CA, Dec. 1986, ASME HTD-Vol. 62, pp. 1-6.

  131. A Comparison of Grid Generation Techniques (with S. R. Kennon), INFOMART-ACM/IEEE Computer Society 1986 Fall Joint Computer Conference, Editors: H. S. Stone and S. Winkler, Dallas, TX, Nov. 2-6, 1986, pp. 568-575.

  132. Acceleration Methods for Iterative Algorithms (with C. Y. Huang and S. R. Kennon), First World Congress on Computational Mechanics, Austin, TX, Sept. 22-26, 1986.

  133. Composite Computational Grid Generation Using Optimization (with S. R. Kennon), First International Conference on Numerical Grid Generation in Computational Fluid Dynamics, Editors: J. Haeuser and C. Taylor, Landshut, W. Germany, July 14-17, 1986, pp. 217- 226.

  134. Analysis of Unsteady Compressible Cascade Flows Using Boundary Element and Free-Vortex Method (with T. Fujinami), 6th International Symposium on Finite Element Methods in Flow Problems, Antibes, France, June 16-20, 1986, pp. 131-136.

  135. Free-Vortex Method Simulation of Unsteady Airfoil/Vortex Interaction (with T. Fujinami and A. Hassan), AIAA 4th Applied Aerodynamics Conference, San Diego, CA, June 9-12, 1986, pp. 189-196.

  136. Generation of Optimum Three-Dimensional Computational Grids (with R. Carcaillet and S. R. Kennon), 6th GAMM Conference on Numerical Methods in Fluid Mechanics, Editors: D. Rues and W. Kordulla, Goettingen, Germany, Sept. 25-27, 1985, pp. 39-46.

  137. Inverse Design of Multiholed Internally Cooled Turbine Blades (with S. R. Kennon), International Conference on Inverse Design Concepts in Engineering Sciences (ICIDES-I), Editor: G. S. Dulikravich, Austin, TX, October 17-18, 1984, pp. 217-240.

  138. Efficient Turbomachinery Grid Generation Using Traupel’s Conformal Mapping (with S. R. Kennon), 1983 ASME Applied Mechanics, Bioengineering and Fluids Conference, Symposium on Advances in Grid Generation, Houston, TX, June 20-22, 1983, Editors: K. N. Ghia and U. Ghia, ASME FED-Vol. 5, 1983, pp. 199-204.

  139. Artificial Mass Concept and Transonic Viscous Flow Equation (with P. Niederdrenk), First Army Conference on Applied Mathematics and Computing, Washington, D.C., May 9-11, 1983, pp. 259-268.

  140. Fast Generation of Three-Dimensional Computational Boundary Conforming Periodic Grids of C-type, in Numerical Grid Generation, Editor: J. F. Thompson, North Holland Publishers, The Netherlands, 1982, pp. 563-584.

  141. Numerical Calculation of Transonic Axial Turbomachinery Flows, Lecture Notes in Physics, Vol. 141, Springer-Verlag, 1981, pp. 164-169.

  142. Fast Generation of Body Conforming Grids for 3-D Axial Turbomachinery Flow Calculation, Workshop on Numerical Grid Generation Techniques for Partial Differential Equations, NASA Langley, Hampton, VA, Oct. 6-7, 1980, NASA CP-2166, 1980, AIAA paper 80-0605, pp. 241-252.

  143. Numerical Calculation of Steady Inviscid Full Potential Compressible Flow About Wind Turbine Blades, AIAA/SERI Wind Energy Conference, Boulder, CO, April 9-11, 1980, pp. 14-19.

bottom of page